Riding a pallet jack: why it is a violation and how a camera sees it
Author: DuoVision team
For: occupational safety engineers, warehouse and production managers, shift supervisors at sites that use pallet jacks
Summary
- A manual pallet jack (hand pallet truck) has no place for a person. Standing on it and pushing off with one foot means riding with no steering and no brake in reach. One manufacturer's manual says it plainly: do not ride on the truck and do not let others.
- An electric pallet truck with a platform may be built for a rider. Whether riding is allowed depends on the model and on site rules. At the plant where we ran the system, standing on the platform was banned.
- A forklift with a driver's seat is not a violation, and the camera has to be told this separately, otherwise it takes the driver for someone riding a pallet jack.
- We ran the rule on recorded footage of a ramp: three of four alerts were real. The sample is small, so this is not an accuracy figure.
For: occupational safety engineers, warehouse and production managers, shift supervisors at sites that use pallet jacks
Why you should not ride a manual pallet jack
A manual pallet jack is built for one job: lift a pallet and pull it by the handle. There is no platform for a person. Someone standing on the forks or the frame cannot see past the load, does not hold a steering handle, cannot reach the brake, and cannot step off at once. A wheel hitting a joint between floor slabs or a threshold gives a jerk, and the rider falls onto concrete.
Other people are at risk too. A loaded jack weighs hundreds of kilograms, and a rider cannot stop it when a colleague steps out from behind a rack. Feet are most often caught under a wheel or under the forks. We do not quote injury statistics for pallet jacks because we did not find a primary source for them. For general data on vehicles, loads, and pedestrians in warehouses, see our overview on forklifts and pedestrians.
What the rules and manufacturers say
In Ukraine, occupational safety rules for loading and unloading work were approved by Order No. 21 of the Ministry of Energy and Coal Industry of 19 January 2015. Section 5 covers in-plant and shop transport. Its clause 14 bans carrying workers on a car, a scooter, or an electric cart that has no places specially equipped for them. A pallet jack is not named there, so for a manual one we rely on manufacturers' manuals. We did not find a rule that speaks directly about electric pallet trucks. The closest one we found is this clause, and whether your model falls under it has to be checked against its design.
The manual for the British Sealey PT1170H.V3 pallet truck forbids riding on the truck and allowing others to ride.
In the United States, OSHA 29 CFR 1910.178(m)(3) says unauthorized personnel may not ride on powered industrial trucks, and where riding is authorized, a safe place to ride must be provided. By its text the standard covers motorized machines, so for manual jacks the site rules and the manufacturer's manual apply.
Can you stand on the platform of an electric pallet truck
It depends on the equipment. Some electric pallet trucks are walk-behind, and some have a fold-down platform where the operator rides standing. The manufacturer provides a place for the operator on the second kind and not on the first. So there is no single yes or no for every site.
At the meat processing plant where we ran the system, the plant decided after looking at the frames that this is also a violation, and we tuned the rule to that. We wrote more about such decisions in our account of launching in a meat plant.
Is riding a forklift a violation
No. A forklift driver sits in the place designed for them and has a steering wheel, brakes, and a horn. For the site this is normal work, provided the driver is authorized. We count as a violation only a person riding a pallet jack where there is no place for them or where site rules forbid it.
For the camera this is a separate task. It has to tell a person on a platform from a forklift driver, otherwise the rule would raise a card for everyone who is simply doing their job. The rule is tuned to tell a forklift driver from a person riding a pallet jack.
How a camera sees someone riding a pallet jack
The rule looks at where the person stands relative to the pallet jack and whether the jack is moving. A person who steps on the platform for a moment to reach a top pallet does not produce a card.
Each case arrives as a card with a frame and a time. Your responsible person decides what to do: talk to the shift, repeat the briefing, or remove the cause. The general approach to cameras at a site is described in the article on PPE and safety control with cameras.
What we saw in practice, and the limits
We ran the rule on a recording from a ramp camera dated 6 October (run of 14 October 2026): the first 46 minutes of the file, one frame per second. There were four alerts. Three showed a person on the platform of an electric pallet truck or next to it, and the reviewer confirmed them as violations. In the fourth, the detection frame sat on another person standing by a wall: a false card. Three of four, but a sample of four events proves nothing. It is a first look.
One more limit. During the actual loading of trucks, when the ramp is crowded, there were no alerts. So we look at truck loading separately instead of relying on the overall picture.
- The camera does not know whether a particular model's manual allows riding. The site sets that.
- If a pallet jack is hidden by a rack or a person, there may be no card.
- The farther the camera is from the truck, the smaller the person in the frame, and the harder it is to see.
Where to start if people ride at your site
- Ask shift supervisors where it happens most. That tells you where to put a camera and a zone.
- Read the manuals for your equipment. They say whether there is a place for an operator.
- Write down in site rules what counts as a violation: manual pallet jack, electric pallet truck, or both.
- Check whether an existing camera covers these aisles and shows a person at full height.
- We can connect to the cameras you already have and start in shadow mode, so you see the cards before they go to people.
Where to apply this
- Warehousing and logistics
- Loading docks and logistics
- Occupational safety
- Meat processing
- Case study: video hygiene control at a meat processing plant, 1,192 cards in 8 weeks
- Hard hat detection by camera: construction, warehouse and production. What it sees and where the limits are
- Work clothing control in food production: when work clothes leave the workshop
Sources
- Order of the Ministry of Energy and Coal Industry of Ukraine of January 19, 2015, No. 21 «Про затвердження Правил охорони праці під час вантажно-розвантажувальних робіт» (“On Approval of the Occupational Safety Rules for Loading and Unloading Work”), section 5, clause 14
- OSHA. 29 CFR 1910.178, Powered industrial trucks, paragraph (m)(3)
- Sealey. Lift Pallet Truck 1000 kg, instructions PT1170H.V3, 15.08.2023