Skip to content
UA Discuss your project
  1. Home
  2. Resources
  3. Case study: video hygiene control at a meat processing plant, 1,192 cards in 8 weeks

Case study: video hygiene control at a meat processing plant, 1,192 cards in 8 weeks

5 min read · Updated 2026-11-13

Author: DuoVision team

For: production directors, quality and HACCP managers at large food plants

Summary

  • At a meat processing plant we connected to more than 30 cameras that were already installed: deboning and packing halls, loading docks, changing rooms, the crate store.
  • Over 8 weeks (17 August – 12 October 2026) the system created 1,192 cards with a frame and timestamp across 13 violation types.
  • The quality team reviewed every card: 906 were confirmed as violations and 286 rejected, many of them duplicates of a scene already confirmed.
  • Most alerts came from clutter at workstations and crates on the floor, followed by masks, phones, items on lockers and leaving the changing room in white workwear.

For: production directors, quality and HACCP managers at large food plants

The task

The plant wanted to see hygiene and housekeeping violations every day, not only during walk-rounds or audits, and without installing new cameras. There were enough cameras in the halls, but nobody had time to watch the footage.

Together with the head of quality we agreed on the list of rules and wrote down for each one what counts as normal, what is a violation and what is "uncertain". A crate on a pallet, trolley or pallet jack was normal; a crate directly on the floor was a violation.

What we did

  • Connected more than 30 existing cameras: deboning and packing halls, docks, changing rooms, crate store, weighing area.
  • Drew control zones on every camera with the HACCP team, so each rule only looks where it makes sense.
  • Every alert became a card: frame, camera, time, rule. Cards went to the quality team's dashboard.
  • The head of quality marked each card "violation" or "reject". Confirmed cards went into a log that shows where and when violations happen most.
  • Each new rule first ran in shadow mode and went live only after we reviewed its cards.

Results in numbers

Period: 17 August – 12 October 2026, 8 weeks. 1,192 cards in total, 906 (76%) confirmed by the quality team.

What we monitoredCardsConfirmed
Crates and trolleys piling up at workstations527460
Crates on the floor without a trolley or pallet303222
No mask in the production area9440
Knives left at the workstation6819
Foreign items on top of lockers5855
Phone in the production area4642
Leaving the changing room in white workwear4342
No gloves, no hairnet309
Meat on the floor116
Dock gate left open without need76
White workwear outdoors, food in production55

A rejected card did not always mean a system error. Often the quality team rejected a duplicate of a scene it had already confirmed from another frame.

What the plant got

  • The quality team saw every day which halls and cameras had the most violations.
  • Every confirmed violation had a frame and a time, so a talk with a shift leader could be about a specific case.
  • The log with frames is usable for an internal HACCP audit: what, where and when.
  • Not a single new camera was needed.

How to start at your plant

We start with a free demo on one of your cameras: we connect, set up the two or three rules that hurt most, and within one or two weeks show real cards from your hall. Then a pilot for one zone and rollout to the whole plant.

Lessons from this rollout: what we learned after launching at the plant. Get in touch: contacts.

Where to apply this

Let’s discuss your site

Request a consultation or a project estimate. We will tell you what your cameras can monitor, where it is best to process the video and how much it will cost.