Skip to content
UA Discuss your project
  1. Home
  2. Resources
  3. Hard hat detection by camera: construction, warehouse and production. What it sees and where the limits are

Hard hat detection by camera: construction, warehouse and production. What it sees and where the limits are

7 min read · Updated 2026-11-13

Author: DuoVision team

For: occupational safety engineers and managers of construction sites, warehouses and plants where people work near cranes, forklifts and conveyors

Summary

  • The camera finds a person in a defined zone, looks at the head and answers one of three things: hard hat present, hard hat missing, not visible. If a hard hat is missing for several frames in a row, a card appears with the frame, camera and time. Your responsible person makes the decision.
  • The annex 3 list of work in Ministry of Social Policy order No. 1804 requires head protection on construction sites, and also for moving loads, work near hoisting machinery, cranes and conveyors, and work at slaughterhouses.
  • We configure hard hat rules for construction, warehouse and production on your site and on your cameras, and start in shadow mode: cards are created but not acted on, so you see the result before anything goes live.
  • A cap, a hood and a yellow beanie can look like a hard hat from a distance, and a hard hat held in a hand or hanging on a belt is not on the head. We agree on such cases before launch and test them on frames from your site.
  • The camera sees whether a hard hat is present. It does not check whether the chin strap is fastened, the protection class or the expiry date.

For: occupational safety engineers and managers of construction sites, warehouses and plants where people work near cranes, forklifts and conveyors

Where a hard hat is required by regulation

Article 14 of the Ukrainian Law "On Labour Protection" obliges employees to use collective and personal protective equipment, and Article 8 puts the purchase and issue of it on the employer, at the employer's expense. Which kinds of work need head protection is shown in annex 3 to the Minimum Safety and Health Requirements for the Use of Personal Protective Equipment at the Workplace (Ministry of Social Policy order No. 1804 of 29.11.2018). The list is indicative. Its "Head protection" section names, among others:

  • construction work, reconstruction or demolition, work near scaffolding and on suspended platforms, assembly and dismantling of formwork;
  • moving loads, assembling structures and installing equipment;
  • work near lifts, hoisting machinery, cranes and conveyors;
  • work near industrial furnaces, tanks, machines and mechanisms, bunkers, pipelines and on silo towers;
  • work at slaughterhouses.

The list ends with "other kinds of work where head injury is possible". So a construction site, a warehouse with cranes and loads, a plant with conveyors and bunkers, and a grain elevator with silos all fall under it.

For comparison, the US OSHA construction standard (29 CFR 1926.100, paragraph a) requires protective helmets where there is a danger of head injury from impact, falling or flying objects, or electric shock.

The stakes are visible in statistics. According to Eurostat, 23 % of fatal accidents at work in the EU in 2024 happened in construction, more than in any other sector. We broke down figures by country and cause in the article on construction injuries.

How the camera checks a hard hat

The logic is the same as in the guide to PPE control with cameras:

  1. The system finds every person in a zone you mark: site entrance, the area under a crane, a warehouse gate, the approach to a conveyor.
  2. For each person it looks at the head and answers: hard hat present, hard hat missing, not visible.
  3. If the hard hat is missing for several frames in a row, a card is created: frame, camera, zone, time. Neighbouring frames of one situation are merged into one card.
  4. A safety engineer or foreman looks at the card and presses "violation" or "reject". Confirmed cards go to the log.

The system does not fine anyone and does not establish who exactly broke the rule: we do not recognise faces. It shows where and when a hard hat was missing. Your briefing process takes it from there.

Finding people in the frame is something we already do, and our rules rely on it. Recognising the hard hat on the head is what we configure for your site: on frames from your site, warehouse or plant, in your lighting and with your hard hat types. Until then the rule runs in shadow mode.

Construction, warehouse and production: how the tasks differ

SiteWhere we place the ruleWhat we solve separately
Construction siteGate and entrance to the work area, the zone under a crane or lift, the assembly perimeterCameras are high and far away, people are small in the frame. The site changes weekly as the building grows, so zones are reviewed
WarehouseGates and ramp, forklift lanes, areas with racking and an overhead craneA hard hat is not needed everywhere: your safety engineer decides where, and we draw that zone. The rule is off in the rest of the warehouse
Plant and grain elevatorApproaches to conveyors, bunkers, bucket elevators, silosPeople walk between zones with and without a hard hat, so zone borders matter, and so does where a person is fully visible

For warehouses we looked separately at what else a camera can see, and scenarios for sites are collected on the pages for construction and warehouses and logistics.

What interferes with recognition and what we do about it

SituationWhat happensWhat we do
Cap, hood, yellow beanieFrom a distance the outline looks like a hard hatWe test these cases on frames from your site and, if needed, limit the rule zone to the nearer part of the frame
Hard hat in hand, on a belt or on a backpackThe hard hat is in the frame but not on the headBefore launch we agree that this is a violation. The rule looks at the head, not at whether a hard hat appears in the frame
Small figure at a distanceThe head covers a few pixels, the answer is unreliableWe answer "not visible" and create no card. We suggest a closer camera or a narrower zone
OcclusionThe head is hidden by scaffolding, a beam, a machine or another person"Not visible", no card
LightingBacklit sun, evening, rain, glare on wet surfacesWe test the rule by day and by night separately
Visitors and contractorsHard hats of another colour or modelWe agree in advance whether the rule applies to them and add their hard hats to the setup

If the head is not visible, the system does not guess. Otherwise the responsible person would drown in cards of people who simply stand with their backs to the camera.

What the camera does not check

The camera sees whether a hard hat is on the head. It does not check:

  • whether the chin strap is fastened and the hard hat fits;
  • protection class, marking and expiry date;
  • whether the hard hat suits the hazards of this particular place (for example, work near electrical equipment);
  • whether the person has had a briefing.

These stay with the employer. Under paragraph 13 of the Minimum Requirements, before issuing PPE the employer must inform the worker about the risks it protects against and train workers regularly in its use. The camera helps to see on which areas and at which hours hard hats are missing, and that can go into briefings.

Shadow mode and video monitoring of employees

Before cards go into daily work, the rule runs for several weeks in shadow mode. Cards are created, your people review them, and at the end you see the result: how many cards, over what period, on which cameras, how many confirmed. Neighbouring frames of one event count as one event. If there are too many false cards, we change the zone, threshold or camera and measure again. Only what shows an acceptable result on your events goes live.

Cameras that look at employees mean processing video of people. Before launch, people must be informed, the purpose, retention period and who has access to the log must be defined. How to set this up is described in the guide on video analytics and personal data.

Where to start

  1. Pick one or two points where a hard hat is clearly needed and people pass for sure: site entrance, the area under a crane, a warehouse gate with an overhead crane.
  2. Check whether your existing cameras see these places and whether people are large enough in the frame.
  3. Write down what counts as a violation (hard hat in hand, strap not fastened, visitor without a hard hat) and who will review the cards.
  4. Run shadow mode for several weeks and decide on expansion by the result.

We can connect to the cameras you already have and start in shadow mode. You can discuss your site via contacts.

Frequently asked questions

Can hard hats be monitored on cameras that are already installed?

Often yes. The size of the head in the frame and the angle decide: the closer and higher the camera, the more reliable the answer. Before launch we look at frames from your site and tell you on which cameras the rule makes sense and where a camera should be added.

Does the system tell a cap from a hard hat?

This is the most common cause of false cards, so we test it separately on frames from your site and in shadow mode. Where the difference cannot be made out, the system answers "not visible".

Does the system recognise who exactly has no hard hat?

No. We do not recognise faces. The card shows where and when a hard hat was missing, and your responsible person decides what to do about it.

Is a hard hat needed in a warehouse?

It depends on the work. Annex 3 to order No. 1804 names, among others, moving loads and work near hoisting machinery, cranes and conveyors. Where exactly that applies in your warehouse is decided by your safety engineer, and we configure the rule for those zones.

Does the system issue fines?

No. It creates cards with a frame. Any consequences are decided by a person under your internal rules.

Where to apply this

Sources

  1. Ministry of Social Policy order No. 1804 of 29.11.2018, Minimum Safety and Health Requirements for the Use of Personal Protective Equipment at the Workplace, annex 3, section "Head protection"
  2. Law of Ukraine "On Labour Protection" of 14.10.1992 No. 2694-XII, articles 8 and 14
  3. OSHA. 29 CFR 1926.100, Head protection
  4. Eurostat. Accidents at work statistics

Let’s discuss your site

Request a consultation or a project estimate. We will tell you what your cameras can monitor, where it is best to process the video and how much it will cost.