- Home
- Resources
- Video analytics for warehouses: aisles, forklifts, the dock and people in the machinery zone
Video analytics for warehouses: aisles, forklifts, the dock and people in the machinery zone
Author: DuoVision team
For: warehouse and logistics centre managers, occupational safety engineers, owners of plants with their own warehouse
Summary
- In a warehouse cameras usually already hang over aisles and docks, but the recording is opened after an incident. Video analytics watches the same stream right away and returns cards with a frame.
- At the meat processing plant where we launched the system, a rule ran on dock gates open without need (7 cards in 8 weeks, 6 confirmed), and we tested riding a pallet jack while standing on a recording from the dock camera (4 detections, 3 real). The system tells people and machinery apart in the frame.
- People in the forklift zone, blocked aisles, trucks idling at the dock and safety vests: we configure these for your warehouse and start in shadow mode.
- The labour protection rules for loading and unloading (order No. 21) prohibit unrelated persons in the work areas and in the operating zone of lifting machinery, and require hazardous areas to be marked with signal colours and signs, and aisles with markings where needed.
- The camera does not weigh cargo and does not recognise faces. It shows where, when and how many times something happened that you defined as a violation.
For: warehouse and logistics centre managers, occupational safety engineers, owners of plants with their own warehouse
What can be seen in a warehouse with a camera
| What we watch | What is visible | Status |
|---|---|---|
| Riding a pallet jack | A person stands on the platform of a manual or electric pallet jack and rides | Tested on a dock recording at the meat processing plant |
| Dock gates | Gates open when there is no truck or no cargo is moving | Tested on a dock recording at the meat processing plant |
| People and machinery in one lane | A person in the zone where a forklift drives, at the dock while a truck is being positioned | Configured for your warehouse, shadow mode first |
| Blocked aisles and lanes | A pallet, crates or a cart stand in a lane, in a marked zone or by an exit longer than allowed | Configured for your warehouse, shadow mode first |
| Person on the forks | Someone stands or is lifted on forklift forks | Configured for your warehouse, shadow mode first |
| Safety vests and hard hats | A person in the machinery zone without a vest or hard hat | Configured for your warehouse, shadow mode first |
| Trucks at the dock | Time from arrival to departure, queue at the gates | Configured for your warehouse, shadow mode first |
| Vehicle plates | Plate at entry and exit, check against a list | A separate system, see licence plate recognition |
Each event arrives as a card: frame, camera, zone, time, rule. Your responsible person decides "violation" or "reject". The system makes no automatic punishments.
People in the machinery zone
The labour protection rules for loading and unloading (Ministry of Energy and Coal Industry order No. 21 of 19.01.2015) are quite direct here. In the places where loading and unloading is done and in the operating zone of lifting machinery, persons unrelated to this work are prohibited. Areas of storage premises where presence is dangerous must be painted in signal colours and marked with safety signs. Where needed, marking for aisles and storage areas is applied at the work sites.
One of the forklift movement rules requires keeping at least 0.5 m between the forklift or its load and equipment or stacks. A camera from a single angle estimates such a distance only roughly, so we do not build rules on metres. What is reliably visible is different: a person inside the zone you marked while machinery is working there.
The scale of the problem is visible in British HSE data: over the five years 2021/22-2025/26, moving vehicles killed on average 22 workers a year, and in transport and storage they accounted for 30 % of work deaths. Ukraine has no separate open statistics that we could find, but the risks in a warehouse are the same. Data from Britain, Japan and Australia is covered in the article on pedestrians and forklifts.
What the camera gives: you can see every day where people walk in the machinery lane. Sometimes the problem is solved by a new walkway or marking in another place, and no reprimand is needed. Cards over a week or two show such places more precisely than a walk-around.
Pallet jacks and forklifts
Riding a pallet jack while standing is something we tested on a recording from the dock camera at the meat processing plant (4 detections, 3 real). We explained why it is a violation and how a camera sees it separately in the article on riding pallet jacks. In short: we treated an electric pallet jack with a platform that carries a person as a violation by the decision of the quality service, and a forklift with the driver in the cab as normal.
Order No. 21 prohibits lifting, lowering and carrying workers on the forks of an electric forklift. A camera sees a person on the forks if they are large enough in the frame, but we configure this rule for your angles and start in shadow mode.
Aisles and lanes
The loading and unloading rules require electric carts and forklifts to be parked so that they do not block aisles, lanes and exits. We found no direct rule in this order about cargo in a lane, but a pallet left in a lane makes both pedestrian and driver act outside the plan.
A camera can track that something stands in a lane or by an exit longer than the time you set, and give a card with a frame. The time value and the zone limits we define with your responsible person: in one warehouse a pallet standing three minutes in a lane is normal during picking, in another it is not. We configure this rule for your warehouse and start in shadow mode.
The dock and trucks
Two different types of events are visible at the dock. The first concerns safety and order: gates open without need, people at the edge, machinery by the truck. Over 8 weeks at the meat processing plant the system created 7 cards on dock gates open without need, and the quality service confirmed 6 (violation log, sample of 13.11.2026). The volume is small, so we draw no conclusions about accuracy from it.
The second type is about time and losses: how long a truck stands, who walks near it after the documents are signed. Figures on cargo theft and truck idling in the US and Europe are collected in the article on losses at the dock. Truck dwell time and gate queues we configure for your warehouse and start in shadow mode. Plates at the entrance are read by a separate system, see vehicle plates in a warehouse and elevator.
What the camera does not do
- It does not weigh cargo and does not count boxes on a pallet. Scales exist for weight, and stock is tracked by your systems.
- It does not recognise faces and does not establish who exactly broke a rule.
- It does not see what is hidden by racking, machinery or another person. In such cases the system answers "not visible".
- It does not guarantee a hundred per cent result. We show the result on your warehouse in shadow mode before going live.
Where to start
- Draw on the warehouse plan where machinery drives, where people walk and where these routes cross.
- Check which of these places are seen by existing cameras and whether people are large enough in the frame.
- Pick one or two rules: for example people in the forklift zone and dock gates.
- Run shadow mode for several weeks and review the cards with the person responsible for labour protection.
We connect to the cameras you already have and start in shadow mode. Scenarios are collected on the page for warehouses and logistics, and you can reach us via contacts.
Frequently asked questions
Are new cameras needed for warehouse video analytics?
Often not. We check frames from existing cameras: person size, angle, lighting. If a zone is not visible, we advise where to add a camera. We start with what you already have.
Does the system tell a person from a forklift?
Yes, the system tells people and machinery apart in the frame. This is what the rules about people in the machinery zone stand on, and accuracy on your warehouse is shown by shadow mode.
Can a camera count pallets and boxes?
We do not offer this. Stock is tracked by your systems, and the camera shows events: who was where, what stood in a lane, when a gate opened.
How long does shadow mode last?
Usually several weeks. The exact period depends on how many events happen on your cameras: a rule needs enough real cases for your people to assess them.
Does the system fine employees?
No. It creates cards with a frame, and your responsible person decides under your internal rules.
Where to apply this
- Loading docks and logistics
- Occupational safety
- Staff headcount
- Site security and vehicles
- Hard hat detection by camera: construction, warehouse and production. What it sees and where the limits are
- Work clothing control in food production: when work clothes leave the workshop
- Video analytics for woodworking and furniture manufacturing: PPE at machines, aisles, pallet jacks