Skip to content
UA Discuss your project
  1. Home
  2. Resources
  3. Dish pass time in a restaurant: what to count and how a camera does it

Dish pass time in a restaurant: what to count and how a camera does it

6 min read · Updated 2026-11-17

Author: DuoVision team

For: owners and chefs of restaurants, cafes, catering and delivery kitchens

Summary

  • Kitchen speed has three segments: from order to "ready", from "ready" to "picked up", and the total time from order to the guest.
  • A POS and a kitchen screen record the first segment well. The second, the wait at the pass, they see only through people's button presses.
  • A camera above the pass gives the second segment with a photo: when the dish appeared and when it was picked up. No POS integration is needed for this.
  • Count the median and the slow tail, for example 9 dishes out of 10, and not only the average: an average hides slow orders.
  • You set the time norm for each group of dishes. We do not quote anyone else's norms, because we did not check sources for them.

For: owners and chefs of restaurants, cafes, catering and delivery kitchens

Why does pass time matter?

A guest does not see the kitchen. A guest sees how long they waited and whether the dish arrived hot. So pass time is both a kitchen performance metric and part of quality that the guest judges at once. If the kitchen cooks fast but plates stand at the pass, the guest waits as long as with a slow kitchen, and no report shows it.

The other side is peaks. At rush hour orders pile up, and it matters whether the bottleneck is in the kitchen (grill, fryer, cold station) or at the pass (nobody to carry the plates). Without splitting into segments this is invisible.

Which metrics to count?

  • Cook time: from the order reaching the kitchen to the moment of "ready".
  • Wait at the pass: from the dish appearing on the shelf to it being picked up.
  • Total time: from the order to the dish reaching the guest or the courier.
  • How many dishes stand at the pass at once, by hour and day of the week.
  • The share of dishes that exceeded your time norm, separately for each group: salad, hot dishes, pizza and dessert have different norms.

For each metric count the median (half the dishes are faster, half slower) and the slow tail, for example the time within which 9 of 10 dishes fit. An average mixes fast and slow orders, and one dish that stood for half an hour hides among a hundred normal ones.

What do the POS and kitchen screen already measure?

A kitchen screen records what people do. Poster's help page on Kitchen Kit describes it this way: the screen shows the time an order was sent, a timer runs, the "Ready" button sends the server a notification, and completed orders stay in history. In Poster a cook starts the on-screen timer with a button and the screen shows the order time itself, so cook time from the order to "ready" is provided by the POS. What your system writes, check in its help pages, because systems differ.

The weak point is the "ready" moment. A cook presses the button when it suits them, and that can be earlier or later than the moment the plate reached the shelf. How long the dish then stood at the pass is not visible in these records unless someone presses a button when the server picks up the plate. Whether your system has such a press, check in its help pages.

How does a camera count pass time without touching the POS?

A camera above the pass shelf works separately from the POS. We set it up to notice that a dish has appeared on the shelf and record the time, then to notice the dish being picked up and record the second moment. The difference is the wait at the pass, and a photo of the dish at both moments sits in the card.

No access to the POS is needed for this: we do not write to it or change its settings. So at the start you get the wait at the pass, peaks by hour and photos for disputes, and the POS stays untouched.

If later you want to join the two records into one metric, the total time "from order to guest", that is a separate task. At the survey we find out what data your system exports, for example a report with order times, and whether it can be used to match an order to a dish at the pass. Without such matching the camera gives its segment and the POS gives its own. We will not promise a joined metric without knowing your system.

How does the launch go?

In the first week the system detects change in the pass zone: something appeared on the shelf or disappeared. It does not need to know what dish it is. You already get a photo and the time of appearance and disappearance. Then we take your venue's frames and train the dish class, starting with a few menu items. Everything runs in shadow mode: you see the cards, and you decide norms and alerts after reviewing.

More on camera placement, limits and working without a POS: a camera at the pass: a photo and time for every dish.

What to do with the numbers?

  1. Set a norm for each group of dishes. Start with those guests complain about.
  2. Watch the slow tail by hour: if it grows at 13:00 and 20:00, look for the bottleneck in exactly those hours.
  3. Separate the segments: a long cook time points to the kitchen, a long wait at the pass points to how the dining room works.
  4. Show the photos of dishes that exceeded the norm to the shift. A talk over a frame is shorter than a talk about impressions.
  5. After a few weeks compare the same hours. A change can be judged only by comparing the same segments on the same samples.

What are the limits?

  • The camera measures what is visible at the pass. It does not see cook time inside the kitchen, which the POS or the kitchen screen gives.
  • The camera does not measure a dish's temperature or weight.
  • If a person or another dish covers a plate, the moment of appearance can shift. So we place the camera so that the shelf is fully visible, and check this on your frames.
  • The system does not recognize the faces of guests or staff.
  • We show accuracy on your frames during the pilot.

Everything a camera can do for a venue is in the overview video analytics for a restaurant. To discuss your pass, write through the Contacts page. There is also an industry page.

Where to apply this

Sources

  1. Poster, help page: connecting the Kitchen Kit kitchen display to Poster (order time, timer, "Ready" button, history)

Let’s discuss your site

Request a consultation or a project estimate. We will tell you what your cameras can monitor, where it is best to process the video and how much it will cost.