A camera at the pass: a photo and time for every dish in a restaurant
Author: DuoVision team
For: owners and chefs of restaurants, cafes, catering and delivery kitchens
Summary
- A camera above the pass shelf photographs every dish and records when it appeared and when it was picked up.
- It shows the time from "ready" to "picked up", dishes waiting under the heat lamp and peaks by hour, and gives you a photo for disputes with a guest or a courier.
- The POS and the kitchen screen record what people pressed. The camera adds an independent photo and the real moment at the pass.
- We set it up for your venue and first show the results on your own frames.
- In the first week the system detects change in the pass zone. We train the dish class afterwards on your venue's frames.
For: owners and chefs of restaurants, cafes, catering and delivery kitchens
Why would a restaurant put a camera at the pass?
The pass is where the kitchen hands a dish to the dining room. Two demands meet here: the dish should reach the guest hot, and a server should not have to run to the pass for every plate. So plates sometimes wait, and usually nobody knows for how long.
A camera above the shelf puts numbers on this. Every dish gets a photo and two moments in time: when it appeared at the pass and when it was picked up. The data builds up over a shift, a week and a month, and the chef sees where the pass runs smoothly and where plates stand.
What does such a camera show?
- The time from "ready" to "picked up" for every dish.
- Dishes waiting under the lamp longer than your limit. You set the limit, and the system shows a card with a frame when a plate goes over it.
- Peaks by hour: how many dishes stood at the pass at once, at what time and on which days of the week.
- A photo of the plate at the moment it was picked up, for disputes with a guest or a delivery service.
The camera photographs the dish at the pass. It does not judge taste or temperature.
Where should the camera be mounted?
We suggest mounting the camera above the pass shelf, about 1 m over it, so the plates are seen from above. Do not put it over the heat lamp: heat and steam spoil both the camera and the picture, and the lamp itself can blow out the image.
You need an IP camera with an RTSP or ONVIF stream. If one is already in the kitchen, we check whether it sees the whole shelf. If not, we suggest a place for a separate one. Processing runs on a small server in your venue, and the frames stay on site.
What do the POS or kitchen screen already record, and what does the camera add?
A POS with a kitchen screen records what people do. Poster's help page on its Kitchen Kit screen says the screen shows the time an order was sent, a timer runs, the "Ready" button sends the server a notification, and finished orders stay in a history. Check your own system's help page for what it records, because systems differ.
In such a record the moment is set by a press. A cook could press "ready" before putting the plate down, or after. The camera adds an independent photo and the moment the dish actually appeared at the pass and when it was picked up. The two records can be compared, and the difference between them shows how long the dish stood.
How do we start?
In the first week the system just detects change in the pass zone: something appeared on the shelf or disappeared. It does not need to know which dish it is. You already get a photo and the time of appearing and disappearing.
Then we take your venue's frames and train the dish class. We start with a few menu items, show the result and decide together whether to expand. At the start everything runs in shadow mode: you see the cards, and you decide on alerts and limits after reviewing them.
The principle is the same as at the meat processing plant where we checked hairnets, masks, beard covers and gloves: the rule is set for the place and checked on its frames before live mode.
What else can be added in the kitchen?
The same cameras and server can do more: count people in the queue and dining room by hour, check hairnets, gloves and masks on kitchen staff, notice a phone in a zone where it is forbidden, show a cold room door left open longer than your limit, and keep a log of supplier licence plates at the back door. We set all of this up for the venue and first check it in shadow mode.
We wrote separately about checking head covering in production: hair net control in production. For cold rooms there is an article on cold room doors.
What are the limits?
- The camera does not measure the weight or temperature of a dish.
- Portion size, conformity to a plating standard and surface cleanliness are trained on your venue's frames.
- If a person or another dish covers a plate, the moment of appearing may shift. So we mount the camera to see the whole shelf and check this on your frames.
- The system does not recognise the faces of guests or staff. A card says what was at the pass and when.
- We show the accuracy on your own frames during the pilot.
To discuss your venue, write through the Contacts page. See also the industry page.
Where to apply this
- Restaurants and kitchens
- Food safety and hygiene
- Food manufacturing
- Dish pass time in a restaurant: what to count and how a camera does it
- Restaurant kitchen control with a camera: sanitation, HACCP and what the camera checks
- Video analytics for a restaurant: what it does in the kitchen, at the pass and in the dining room