Skip to content
UA Discuss your project
  1. Home
  2. Resources
  3. Video analytics for a restaurant: what it does in the kitchen, at the pass and in the dining room

Video analytics for a restaurant: what it does in the kitchen, at the pass and in the dining room

7 min read · Updated 2026-11-17

Author: DuoVision team

For: owners and chefs of restaurants, cafes, chains, catering and delivery kitchens

Summary

  • Video analytics for a restaurant is software that watches the stream from cameras already in the venue and returns events instead of footage: a dish is waiting at the pass, someone in the kitchen has no hairnet, a queue has formed in the dining room.
  • The easiest place to start is the pass: a photo of every dish and the time it appeared and the time it was picked up.
  • We checked hairnets, masks and gloves at a meat processing plant. For a restaurant we set these rules up for your kitchen.
  • Counting people in the dining room and queues, and watching the kitchen after closing, are set up for the venue and first run in shadow mode.
  • The system does not recognize the faces of guests or staff, does not listen to sound and does not measure a dish's weight from the camera.

For: owners and chefs of restaurants, cafes, chains, catering and delivery kitchens

What is video analytics for a restaurant?

In most venues the cameras record video, and people watch it only after something has happened: a guest complaint, a shortage, an inspection. Video analytics adds a program that watches in place of a person. It takes the stream from the same cameras and looks for the events you defined, and it returns every event it finds as a card with a frame and a time.

For a restaurant there are four places where a camera helps. Each is described below, with a note on what we have already done and what we set up for the venue.

The pass: a photo and a time for every dish

We set up a camera above the pass shelf to photograph the dish and record two moments: when it appeared and when it was picked up. From this you get the waiting time at the pass, the dishes that stand longer than your norm, and peaks by hour. A photo of the plate at the moment it was picked up can help in a dispute with a guest or a courier.

A POS and a kitchen screen record what people press. Poster's help page on its Kitchen Kit screen describes a timer and a "Ready" button: the moment is set by the person who pressed it. The camera adds an independent frame and moment. There is a separate article on this: a camera at the pass: a photo and time for every dish. How to turn this into kitchen metrics is in dish pass time: what to measure.

The kitchen: hairnets, masks, gloves, phones

At the meat processing plant where we ran the system, cameras in the workshops checked hairnets or caps, masks, beard covers and gloves. The outcome of that launch in numbers is in the case study.

A restaurant kitchen is different: fewer people, an open line, less space, so we draw the frame and the zones for your premises. The principle is the same. You decide what counts as a violation, we set the rule, show cards in shadow mode for a few weeks, and only then does the rule go live. Face recognition is not needed for this: a card has a frame, a time and a rule, and no name. Sanitation and documents are covered separately in kitchen control in a restaurant with a camera.

The dining room: guests, queues, occupancy

A camera above the entrance or the till counts people and shows how many guests were in the dining room and in queues by hour and day of the week. You can see when hands are short at the till or in the room and when there are too many. Peak data helps to plan a shift.

The counting principle is described in the articles on queues at checkouts and a store visitor counter. For a restaurant we set up zones for the entrance, the counter and the room. The system only counts guests, and there are no names or faces in it.

After closing: the storeroom, doors, the back entrance

When the venue is closed the camera should see nothing. The rule "someone is in the storeroom or kitchen after closing time" gives a card with a frame instead of a hundred hours of video. The same goes for a cold room door left open longer than your norm: there is a separate article, cold room doors.

At the back entrance you can keep a log of supplier vehicle plates if the camera sees the approach. We set this up for the venue, and you define the zones and hours.

What is proven and what we set up

We gained our experience in food hygiene at a meat processing plant: there we ran rules for hairnets, masks, beard covers, gloves and boxes on the floor. We set the same rules up for a venue's kitchen. The pass, people counting and watching zones after closing we also set up for your venue. We first show all of it on your venue's frames.

  • First we take frames from your cameras and check whether what is needed is visible: the pass shelf, heads and hands on the line, the entrance.
  • Shadow mode: you see the cards, but nobody receives alerts. You decide on norms and alerts after reviewing.
  • We show accuracy on your frames. A percentage "with a guarantee" and no sample proves nothing, so we do not promise one.

What does the venue need?

IP cameras with an RTSP or ONVIF stream and a place for a small server. If cameras are already there, we check whether the needed zones are visible and suggest where to add one or two. By default processing runs on a server in your venue.

Video of people falls under personal data law: staff must be told about the cameras, and access to frames is best limited by role. More in the article on video analytics and personal data.

Where to start

  1. Pick the one task that hurts most: the pass, kitchen hygiene, a queue or the kitchen after closing.
  2. Show us frames from the cameras you have, or a plan of where they could go.
  3. We set up the rule and show it in shadow mode at your venue for a few weeks.
  4. After you review the cards, you decide whether to turn the rule on and whether to add the next one.

To discuss, write through the Contacts page. The overview for venues is also on the industry page.

Where to apply this

Sources

  1. Poster, help page: connecting the Kitchen Kit kitchen display to Poster (order time, timer, "Ready" button, history)

Let’s discuss your site

Request a consultation or a project estimate. We will tell you what your cameras can monitor, where it is best to process the video and how much it will cost.