Skip to content
UA Discuss your project
  1. Home
  2. Resources
  3. Hair net control in food production: how a camera checks that hair is covered

Hair net control in food production: how a camera checks that hair is covered

6 min read · Updated 2026-11-02

Author: DuoVision team

For: heads of HACCP, process engineers, and shift supervisors at food and meat processing plants

Summary

  • A hair net or cap keeps hair out of the product. Metal detectors and X-ray usually do not find a hair, so the only barrier is the person wearing the right gear.
  • A camera checks whether the head is covered and sends an event card with a frame. Your responsible person makes the decision. It does not assess single strands under a cap; it checks whether the head is covered.
  • At the meat processing plant where we ran the system, cameras in the production areas checked hair nets, masks, beard covers, and gloves.
  • Most false event cards came from frames where a conveyor hid the head, and from far corners of the frame. A second check of the frame filtered out the false cards. A zone on the two far corners could have covered them.
  • We have no independent accuracy check for the hair net rule, so we do not quote percentages.

For: heads of HACCP, process engineers, and shift supervisors at food and meat processing plants

Why do production areas require a hair net or cap?

Hair is one of the foreign objects that reach the product from people. Metal detectors and X-ray usually do not catch it, and on a conveyor a single hair is not visible. So in meat processing and other food plants, hair is covered with a cap, a net, or a hood, and a beard and moustache with a cover (often called a beard net).

We went through regulator data on how often hair is found in food in a separate article on foreign objects in food. This one is about something else: how to check that the cover is actually worn when dozens of people are on a shift.

What do the regulations say about head covering?

Regulation (EC) No 852/2004, Annex II, Chapter VIII, requires everyone working in a food-handling area to maintain a high degree of personal cleanliness and to wear suitable, clean and, where necessary, protective clothing.

In Ukraine the basis is Order No. 590 of the Ministry of Agrarian Policy. Clause 2.10.3 covers work clothing and footwear that must not be a cause of food contamination, and says the procedures for using them are to be based on a risk assessment. Clause 2.10.5 requires staff conduct rules, including storage and use of personal and work clothing. We did not find the words "headwear" or "hair" in the text of the order. So the details, where a cap is required, whether all hair must be covered, whether a beard cover is needed, are written by the enterprise into its own rules. The camera checks those rules.

For more on the regulations and what auditors ask, see the article on HACCP and video control.

How does a camera check a hair net?

The method is the one described in the guide to PPE control with cameras. The system finds a person in the zone, looks at the head, and gives one of three answers: covered, not covered, cannot see. If "not covered" holds for several frames in a row, an event card appears with a frame, the camera, and the time. The responsible person presses "violation" or "reject".

A cap is often visible, but not from every angle. A rule about absence needs more certainty than a rule about presence. At the start the system failed to see the cap on about a third of the people, so a "no cap" decision cannot be made from a single frame. The event card does not go out straight away: first the frame goes through a second check.

Can the camera see hair escaping from under the cap?

We hear this question most often. The short answer: the camera does not assess individual strands. The rule we ran at the meat plant answered the question "is there a cover on the head or not". A net, hood, bandana, and a cap of any colour all counted as covered. If a cap has slipped and left half the head open, the system may see "not covered", but that depends on the angle and on how large the person is in the frame.

If this is what matters to you, the answer is a closer camera at the entrance to the area or in the changing room, where a person stops and looks towards the camera. We check this first on frames from your entrance.

What about the beard cover and the mask?

At the plant where we ran the system, the rule was: a mask (beard cover) is needed only for a person who has a beard or stubble. A clean-shaven person is not penalised for having no mask, and the system must not invent a beard where there is none.

These frames turned out harder than the hair nets. Of 12 mask event cards in the first week of the rule running, one was confirmed: the mask pulled down onto the chin. The mask was in the frame, but it was pulled down onto the chin, and that was the violation. A simple filter "mask in the frame means normal" would have removed three false cards but also destroyed the only true one. We did not introduce it. The sample is small, 12 cards, so this is only an observation, with no accuracy figure behind it.

What this means for you: a beard cover can be checked when the person is at least partly turned towards the camera. For cameras that look from behind or from above, we advise against setting it up.

Where did the camera get it wrong for us?

At first the false "no cap" cards came from three places: two far corners of the frame, and one spot where a conveyor hid a person's head while the body was visible. All 15 cards that built up for this rule were rejected by people, and none was confirmed. Fourteen of the 15 came from the two far corners, and a zone on those cameras could have covered them. The card with the conveyor could not be removed by a zone, because the person stood at a legitimate workplace. A second check of the frame filtered out 11 of 12 false cards; it has not yet been tested on real violations.

Then we checked the other side: whether the rule misses real violations. We reviewed 200 frames by hand from nine cameras over five different days, 308 appearances of people. In 306 of them the head was covered, in two it was not. For one of the two there was a card, but for a different person in the frame; for the second there was no card at all. We did not establish the cause of the miss completely. The frames were picked to find at least one case, so the violation rate in the plant cannot be estimated from them. 308 appearances does not mean 308 different workers.

So our conclusion: violations do exist on the frames, but we cannot guarantee that the rule finds all of them.

Where is a hair net required, and what does the camera not check?

Where a cap is required is decided by the plant. Usually it is every area where product is exposed: deboning, trimming, packing, production tables. For each camera we draw a zone in which the rule applies, and exclude places where people stand away from their workplace and the head is hard to see.

  • The camera cannot tell whether the cover is clean or the right size.
  • It cannot see hair under the cap, or whether a net is tied so that nothing falls out.
  • It cannot see places outside the frame: behind a column, in a blind corner.
  • We do not recognise faces, so a card says where and when; who it is, the system does not determine.

Where to start?

  1. Write down in your rules where head covering is required and who needs a beard cover.
  2. Show us the cameras that look at these areas. A few hours of footage is enough.
  3. We draw the zones, run the footage through the system, and show you the cards, including the false ones.
  4. The rule first runs in shadow mode: you see how many cards your people confirmed, and we move to live mode when it suits you.

Contact details are on the Contacts page.

Where to apply this

Sources

  1. Order of the Ministry of Agrarian Policy and Food of October 1, 2012, No. 590 «Про затвердження Вимог щодо розробки, впровадження та застосування постійно діючих процедур, заснованих на принципах НАССР» (“On Approval of the Requirements for the Development, Implementation, and Application of Permanent Procedures Based on HACCP Principles”), clauses 2.10.3 and 2.10.5
  2. Regulation (EC) No 852/2004 on the hygiene of foodstuffs, Annex II, Chapter VIII

Let’s discuss your site

Request a consultation or a project estimate. We will tell you what your cameras can monitor, where it is best to process the video and how much it will cost.