A camera checks whether a worker wears a mask: food production
Author: DuoVision team
For: heads of HACCP services, process engineers and shift supervisors at food and meat processing plants
A camera in a production area sees whether a worker wears a mask and sends a card with a frame. We ran this at a meat processing plant, and we set it up on location for your site.
Summary
- A camera finds a person in the frame, looks at the lower part of the face and gives one of three answers: mask present, no mask, cannot see. A card with a frame goes to your responsible person, who makes the decision.
- At the meat processing plant where we ran the system, cameras checked hairnets, masks, beard covers and gloves. We set the rule up for your site on location.
- The hardest case is a mask pulled down to the chin. A filter that says "a mask is in the frame, so it is fine" would miss exactly this violation.
- We do not recognize faces and we do not listen to sound. The card says where and when the mask was missing. The system does not say who the person is.
- Before battle mode the rule runs in shadow mode. Confirmed cards go into a log with frames that you can show an auditor.
For: heads of HACCP services, process engineers and shift supervisors at food and meat processing plants
Why a mask or beard cover is needed in a food production area
A mask and a beard cover close the part of the face from which hair and droplets can reach the product. That is why food and meat processing plants require the lower part of the face to be covered wherever product is exposed.
EU Regulation No 852/2004 (Annex II, Chapter VIII) requires everyone working in a food handling area to maintain a high level of personal cleanliness and to wear suitable, clean and, where necessary, protective clothing. In Ukraine the basis of this requirement is Order No. 590 of the Ministry of Agrarian Policy: clause 2.10.3 covers workwear that must not be a cause of product contamination, and clause 2.10.5 requires rules of conduct for staff, including on the use of personal and special clothing.
Whether a mask is required, and for whom, the company writes into its own rules. The camera checks exactly those rules. More on the regulations and what auditors ask is in the article on HACCP and video monitoring.
What a camera sees in a mask
The method is the same as in the guide on PPE control with cameras. The system finds a person in the set zone, looks at the lower part of the face and answers: mask present, no mask, cannot see. If the mask is missing for several frames in a row, a card appears with a frame, the camera and the time. The responsible person presses "violation" or "dismiss".
What is visible depends on the angle. A ceiling camera that looks at a person from above or from behind does not see the lower part of the face. It checks a mask or a beard cover when the person is at least partly turned toward the camera. So for this rule we place the camera at the entrance to the production area, in the changing room passage, or near a workstation where people look toward the lens.
When the face is not visible, the system answers "uncertain" and creates no card. Otherwise the responsible person would drown in cards where someone simply stands with their back to the camera.
What the launch at a meat processing plant showed
At the plant where we ran the system, the rule was this: a beard cover is required for those who have a beard or stubble. A person without a beard is not penalized for a missing mask, and the system does not invent a beard where there is none.
In the first week the mask rule created 12 cards, and the responsible people confirmed only one of them: the mask was in the frame but pulled down to the chin, and that was the violation. The sample is small, 12 cards, so this is an observation and not an accuracy estimate. We do not give percentages.
A simple filter "a mask is in the frame, so it is fine" would have removed three false cards, and the only confirmed one along with them. That is why we did not introduce it.
Where false cards come from
- A person without a beard. If the company rule requires a beard cover only for people with a beard, the system must know that condition. Without it, everyone without a cover would be a violator.
- A mask pulled down to the chin. The mask is in the frame but not on the face. This is a violation, but a simple "is the item there" rule does not see it.
- Occlusion. Equipment, product or another person covers the face. Here the system answers "uncertain".
- Far corners of the frame. The face takes a few pixels. For such places we draw the rule zone so that it avoids the far corners, or we recommend a closer camera.
We show all false cards together with real ones in shadow mode, and we adjust the zone and the conditions of the rule to your site.
What the camera does not do
- It does not recognize faces and does not establish who exactly was without a mask.
- It does not listen to sound.
- It does not assess the cleanliness of the mask, its type or how tightly it fits.
- It does not see places outside the frame: behind a column, in a blind corner.
- It does not decide for a person. The card says where and when the mask was missing, and your responsible person makes the decision.
How this goes into the audit log
Each possible violation arrives as a card with a frame, a camera and a time. Your HACCP specialist confirms or dismisses it. What is confirmed adds up to a log with frames that you can show an auditor. How such a log becomes evidence is described in the article on HACCP and video monitoring.
Related hygiene checks are described separately: hairnet control in production with cameras, workwear control and glove control.
Where to start
- Write down in your rules where and for whom a mask or beard cover is required.
- Show us the cameras that look at these zones. A recording of a few hours is enough.
- We check whether the lower part of the face is visible, draw the zones and show you the cards together with the false ones.
- The rule first runs in shadow mode: you see how many cards your people confirmed. We move to battle mode when that suits you.
More on staff hygiene control on the pages about food safety and meat processing. Contact us through the contacts page.
Where to apply this
- Food safety and hygiene
- Meat processing
- Food manufacturing
- Smoke and fire detection with cameras in production
- Line and equipment downtime: how to measure it with a camera when there are no sensors or MES
- What FSSC 22000, BRCGS and IFS auditors check on the floor, and the records video monitoring can supply